HELP ELIMINATE
WASTED ELECTRICAL
CONSUMPTION
THE PROBLEM:
Most motorized home appliances (air conditioning units, refrigerators, freezers,
ceiling fans, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace
blowers, etc.) operate most efficiently when they’re operating at full capacity.
When they’re not working at full capacity they pull more energy than they use, wasting the
difference. In fact, the average home in America today operates at a power factor of .77. That means a large
portion of the electricity being delivered to the home is being wasted by the use of
motorized appliances.
THE STEADY POWER™ SOLUTION:
POWER FACTOR OPTIMIZATION:
The SteadyPower™ unit can improve power factor up to .97 or .98, therefore
increasing the effective use of your electricity.
|
PROTECT APPLIANCES AND
ELECTRONICS FROM THE DAMAGE CAUSED BY VOLTAGE SPIKES
THE PROBLEM:
Typical residential and light commercial
power sources allow literally hundreds of spikes and surges per day to reach valuable
electronic equipment in your home. These voltage spikes come from many different sources (motors, power
fluctuations, static electricity, lightning, etc.) but can all cause damage to televisions, stereos,
computers, DVRs, security systems, etc.
THE STEADY POWER™ SOLUTION:
DUAL-MODE SURGE SUPPRESSION:
The SteadyPower™ operates in a dual-mode
for surge suppression, alternating between two
different types of protection.
SteadyPower™ uses MOVs (Metal Oxide Varistors) to act as a sort of “pressure relief valve,” diverting the
surge to neutral /ground lines. Should a massive surge (like a direct lightning strike)
attempt to pass through, SteadyPower™ is designed to cut off the flow of electricity
and block the surge, keeping damage to a minimum and prolonging the operating life
of your appliances and electronic devices.
|
PROLONG THE LIFE OF
APPLIANCES AND ELECTRONICS BY
REDUCING ELECTRICAL “NOISE”
THE PROBLEM:
Our homes, businesses and factories are filled with
electronic devices that generate “noise.” It’s this noise that’s responsible for that all-too-familiar static you
hear on your home radio receiver, the “hum” of a fluorescent lamp, or the “snow” you see when a TV
produces a weak signal. And those are just examples of the electric noise we can see and hear. Imagine
how much noise is coming from everything else in your home that you can’t see or hear. What you also
can’t see or hear is the damage this noise does to switching power supplies, causing
premature failure.
THE STEADY POWER™ SOLUTION:
LINE NOISE FILTRATION:
Designed to filter line noise and high frequency
current (trash) from the electrical environment, electrical noise filtration reduces the potential for
leakage into the human environment and the creation of additional trash in non-linear loads
(televisions, computers, variable frequency drives, energy-efficient lighting, etc.).
By reducing the electrical noise and trash current in your home, the SteadyPower™
helps protect the switching power supplies, helping
prevent premature failure and prolonging the life
of your appliances and electronic devices.
|
